You are here

Lantern and Evergreens Holiday Centerpiece

Filed Under:
Agriculture
Publication Number: P3429
View as PDF: P3429.pdf
Completed Lantern and Evergreens Holiday Centerpiece

Natural, fresh evergreens make the best holiday decorations, and Mississippi’s lush landscapes provide a wide variety that can be used in floral design. Your home garden and garden center are ideal starting places for this exceptional centerpiece that can also be used to adorn a kitchen island or sofa table in your home, or a focal area in your church or business.

Professional florists can create dozens of these designs at a time and successfully refrigerate them for weeks until delivery. This arrangement has the potential to be displayed for months if cared for properly. Considering the small number of supplies it takes to complete the design, this charming arrangement is a classic for the holiday season.

Mississippi is a big, green garden! The following beautiful plant materials flourish in our state and are recommended for floral design:

Arborvitae — Thuja occidentalis

Aspidistra — Aspidistra elatior

Boxwood — Buxus sp.

Camellia — Camellia sp.

Cedar — Juniperus virginiana

Holly — Ilex sp.

Juniper — Cedrus sp.

Leyland cypress — x Cupressocyparis leylandii

Magnolia — Magnolia grandiflora

Little Gem magnolia — Magnolia grandiflora ‘Little Gem’

Pine — Pinus spp.

Pittosporum — Pittosporum tobira

Smilax — Smilax spp.

Southern wax myrtle — Myrica cerifera

Sweet olive — Osmanthus fragrans

Commercial outlets, including lawn and garden stores and Christmas tree farms, sell cut foliage by the type or in mixed bunches. They may offer these evergreens as well as others:

Douglas fir — Pseudotsuga menziesii

Fraser fir — Abies fraseri

Noble fir — Abies procera

Virginia pine — Pinus virginiana

White pine — Pinus strobus

Step 1: Gather Materials

Gather the materials needed for the design. A variety of at least three different types of foliage will provide a harmonious arrangement.

materials needed for the design
  • #40 red ribbon, approximately 3 inches wide, about 2 yards
  • 12- to 18-inch-tall lantern
  • 9- to 12-inch-wide plastic tray
  • Artificial berry spray
  • Fresh flower foam
  • Pillar candle, traditional burning or battery-operated, proportionate to lantern
  • Pruning shears
  • Ribbon scissors
  • Vinyl sheeting
  • Waterproof tape
  • Wired wooden picks
  • A variety of cut greenery

Step 2: Prepare Ribbon Accents

Image description in text
First, cut the ribbon into three 24-inch lengths.
Image description in text
Fold the ribbon so that it follows an S shape.
Image description in text
Cut the ribbon at the end of the S where the curve and an end meet, making two notches on the sides.
Image description in text
Use a wired wood pick to hold this notched area tightly in place.
Image description in text
Create three of these looped ribbon accents.

Step 3: Prepare Floral Foam and Container

Image description in text
Next, cut a dry brick of fresh flower foam to the right size for the plate. This example needed approximately two-thirds of the original brick size. Free-float soak the brick in water.
Image description in text
Do not force the brick below the water line. It takes the foam less than 1 minute to fully hydrate.
Image description in text
When it has taken up the maximum amount of water, it will float just beneath the surface of the water. Note: The depth of the water must be greater than the height of the foam. Otherwise, the foam may not fully hydrate, and pockets of air may remain inside the brick.
Image description in text
Place the soaked foam on the plate, and then add a layer of vinyl film over the top of the foam. This layer keeps the metal lantern base from rusting. We used plastic shelf liner. Using waterproof tape, adhere the foam/vinyl unit to the plate, bringing the tape all the way around the container in a crisscross pattern.

Step 4: Place the Greenery

Image description in text
Image description in text
Make the first three placements in a triangular pattern.
  • The placements should be impaled at least 1 inch in the foam.
  • The stems should be touching the rim of the container.
  • The foliage should gently rest on the tabletop.
Image description in text
Add more foliage at this level, resting on the rim of the container and touching the tabletop.
Image description in text
Image description in text
Broad aspidistra foliage quickly fills in a design but can be too large. Curl the leaf over itself and use its stem to pierce through the leaf blade. Next, insert the stem so that at least 1 inch of the stem is within the foam.
Image description in text
Continue making placements in order to achieve a circle of greenery, concentrating on the base of the foam and covering the plate.
Image description in text
Add more foliage toward the upper edge of the brick. These placements should be shorter in length than the longer, initial placements. The greenery portion of the design should taper in a mound shape.

Step 5: Add Decorations

Image description in text
Add the ribbon loops in a triangular pattern.
Image description in text
Image description in text
Cut a stem of berries into three separate placements and add in a triangular pattern between the ribbon loops.
Image description in text
Set the lantern on top of the vinyl sheet. If any foam is showing, add very short stems of greenery. Keep in mind that the sides of the lantern should not be obscured by greenery.

Step 6: Add Water and Enjoy

Image description in text
When finished, remember to add water to the container because the fresh-cut foliage will drink it up very quickly. You can keep the centerpiece in an unheated garage or covered porch overnight to extend the fresh display.

Commercial producers or florists can attach a care tag to finished arrangements when marketing to consumers. Gift recipients will appreciate instructions to lengthen the life span of the design. Include the following information on your tag.

Attention: This lantern is not attached to the greenery base of this arrangement. Handle with care.

This arrangement is made from fresh-cut foliage arranged in floral foam. Add water to the container, and check the water level every few days. Keep the design out of warm drafts and direct sunlight.

If possible, store in a cool place until displayed.

Never leave a burning candle unattended.

Publication 3429 (POD-04-23)

By James M. DelPrince, PhD, AIFD, PFCI, Horticulture Specialist and Assistant Professor, Coastal Research and Extension Center.

Print Friendly, PDF & Email

The Mississippi State University Extension Service is working to ensure all web content is accessible to all users. If you need assistance accessing any of our content, please email the webteam or call 662-325-2262.

Select Your County Office

Related News

December 9, 2024
December 9, 2024
December 2, 2024
November 22, 2024
November 21, 2024

Pages

Related Publications

Publication Number: P2880
Publication Number: P3255
Publication Number: P3276
Publication Number: P3865
Publication Number: P2471

Pages

Recent Issues

Pages